en
Русский [ru]
HG-BWA
Description:
Type BWA combines a profile with an asymmetrical edge and a wiper ring.
Since the seal is mounted in a separate mounting groove, the BWA cuff has the following advantages:
reduced sizes;
faster design of the seat.
Technical specifications:
Pressure: < 20 bar.
Speed: < 1 m/s.
Temperature: -30В°C to +90В°C.
Operating environment: air with or without lubricant, mineral oil or grease (see Table 1 on page 1.2.4).
Material:
Standard material: polyurethane 90 Shore A.
Standard material code: B0.
Alternative material: 85 Shore A.
Alternative material code: A0.
Installation:
It is necessary to observe a certain value of the roughness of the surface of the seat where the wiper ring is installed, in order to minimize wear of the seal during operation.
- Description
Description:
Type BWA combines a profile with an asymmetrical edge and a wiper ring.
Since the seal is mounted in a separate mounting groove, the BWA cuff has the following advantages:
reduced sizes;
faster design of the seat.
Technical specifications:
Pressure: < 20 bar.
Speed: < 1 m/s.
Temperature: -30В°C to +90В°C.
Operating environment: air with or without lubricant, mineral oil or grease (see Table 1 on page 1.2.4).
Material:
Standard material: polyurethane 90 Shore A.
Standard material code: B0.
Alternative material: 85 Shore A.
Alternative material code: A0.
Installation:
It is necessary to observe a certain value of the roughness of the surface of the seat where the wiper ring is installed, in order to minimize wear of the seal during operation.
