HP-KDSB
Description:
The KDSB seal includes a central sealing collar made of NBR material, two anti-extrusion rings and two outer guide rings that secure the piston in a straight line in the cylinder.
Technical specifications:
Pressure: from 0 to 300 bar with a peak value of up to 400 bar at a temperature of +60В°C.
Speed: < 0,5 m/s.
Temperature: -30В°C to +100В°C.
Operating environment: mineral oil (see Table 1 on page 1.2.4).
Material:
This cuff is made of the following materials:
center ring material NBR Shore 70 A В±3;
anti-extrusion rings - thermoplastic elastomer (TPE);
outer guide rings - polyacetal (POM).
Material code: CX.
Installation:
The seal can be installed in a closed groove in an integral piston, or in an open groove in a piston consisting of two parts.
Sealing components are installed in the following order:
1. Center ring made of NBR material.
2. Anti-extrusion rings.
3. Guide rings.
The permissible roughness of the piston surface must be observed during the installation of the seal to avoid damage to the rubber ring.
- Description
Description:
The KDSB seal includes a central sealing collar made of NBR material, two anti-extrusion rings and two outer guide rings that secure the piston in a straight line in the cylinder.
Technical specifications:
Pressure: from 0 to 300 bar with a peak value of up to 400 bar at a temperature of +60В°C.
Speed: < 0,5 m/s.
Temperature: -30В°C to +100В°C.
Operating environment: mineral oil (see Table 1 on page 1.2.4).
Material:
This cuff is made of the following materials:
center ring material NBR Shore 70 A В±3;
anti-extrusion rings - thermoplastic elastomer (TPE);
outer guide rings - polyacetal (POM).
Material code: CX.
Installation:
The seal can be installed in a closed groove in an integral piston, or in an open groove in a piston consisting of two parts.
Sealing components are installed in the following order:
1. Center ring made of NBR material.
2. Anti-extrusion rings.
3. Guide rings.
The permissible roughness of the piston surface must be observed during the installation of the seal to avoid damage to the rubber ring.